Skip to content
Cut List Ledger

Terms of Use

Verify materials, measurements, and the layout against your actual job.

Use of the calculator

The site produces a cut layout from the sizes and material names you enter. Recheck the stock, part dimensions, blade kerf, trim setting, and allowed orientation before relying on a result. The calculator compares several heuristics and may not find the layout with the fewest sheets.

The drawings show intended dimensions and placement. They do not replace equipment instructions or determine the sequence in which your actual cuts should be made.

Downloads and feedback

You may use the plans and downloads that you create for your own work. Only enter measurements or job information you have the right to use.

The feedback form is for relevant site comments. Spam, abusive content, and messages that disclose someone else's information may be withheld or removed.

If you have a question about the tool or its output, contact Cut List Ledger.

Last updated November 19, 2026.